压力与速度数值分三列给出：离心泵 · 搅拌机 · 阀门。
100 % crystalline graphite synthetic fibre impregnated with colloidal graphite in synthetic oil. For cryogenic duty, centrifugal pumps, chemical industry and power generation.
Pure pre-oxidised P.A.N. carbon yarn impregnated with colloidal graphite in synthetic oil. For valves and dynamic steam and hydrocarbon duty at medium temperature.
Pure pre-oxidised carbon yarn impregnated with colloidal PTFE suspension. Centrifugal and reciprocating pumps, mixers, agitators, dryers and valve stems.
99 % synthetic graphite fibre impregnated with colloidal graphite in synthetic oil. High-temperature, high-strength pump and valve duty, aggressive fluids.
96 % synthetic graphite fibre with 4 % Inconel alloy. For high-temperature, high-pressure steam valves and as top and bottom anti-extrusion rings alongside Style 1099.
38 % synthetic graphite fibre and 62 % expanded graphite, impregnated with non-metallic corrosion inhibitor. Heavy-duty valves, pumps and pistons at high temperature and pressure.
40 % carbon-graphite fibre core and corners with 60 % expanded graphite braided tapes. Heavy-duty centrifugal and piston pumps and very high pressure valves.
Acrylic fibres wrapped in PTFE yarns around a silicone core. Withstands repeated opening and closing cycles: tank lids, hatches and inspection covers on tankers of all IMO classes.
100 % PTFE braided at controlled high density, impregnated with PTFE dispersion. Strong chemicals in static applications (valves, gates, cocks, manholes) and low-speed pumps.
100 % controlled high-density PTFE impregnated with food-grade lubricant. Chemical, food and pharmaceutical industry.
Long meta-aramid fibres at controlled high density impregnated with 40 % colloidal PTFE. Heavy duty and pulp & paper applications requiring a white, non-staining packing.
Controlled high-density Phen-Top fibres impregnated with colloidal PTFE and synthetic oil. Abrasive products, pulp, paper and sugar.
100 % PTFE braided at controlled high density, impregnated with colloidal PTFE. Centrifugal pumps, agitators, mixers and reactors with most chemicals.
100 % pure expanded PTFE yarn with encapsulated lubricants; complies with FDA CFR 177.550. Centrifugal pumps and agitators in chemical, pharmaceutical and food industry.
Textured and treated vegetable fibre impregnated with colloidal PTFE and synthetic oil. Marine duty (stern tubes and rudder posts), paper industry and wastewater.
Phen-Top structure and corners with aramid reinforcement, colloidal PTFE impregnation and silicone rubber core. Large heavy-duty pumps, mixers and crystallisers, sugar, pulp and paper.
Long aramid fibres impregnated with 20 % colloidal PTFE and synthetic oil. Centrifugal and piston valves, expansion joints, water, steam, solvents, mild acids and alkalis, marine and paper industry.
Staple aramid fibres impregnated with 25 % colloidal PTFE and synthetic oil. Pumps, valves, expansion joints and piston pumps; chemical, pulp & paper, pharmaceutical, food and water treatment.
Staple aramid fibres impregnated with 25 % colloidal graphite and synthetic oil. High temperature and pressure heavy duty: boiler feed pumps, steam valves and gates.
Interwoven aramid, PTFE and graphite fibres impregnated with colloidal PTFE and synthetic oil. Centrifugal and piston pumps, mixers and reactors.
Pure PTFE yarn with corners reinforced by continuous aramid fibres. Centrifugal and piston pumps, mixers and valves; food, chemical and pharmaceutical industry.
Expanded PTFE with pure graphite dispersion. Centrifugal pumps, reactors, mixers, valves, gates, covers and expansion joints. Static sealing in almost any chemical.
Expanded PTFE with colloidal graphite dispersion. Especially suited to worn shafts and pumps in poor mechanical condition.
Aramid structure wrapped with PTFE-graphite film: high heat dissipation and tensile strength. High pressure, high speed and worn shafts.
25 % antifriction metal foil and 75 % expanded graphite with corrosion inhibitor. Crude oil, tar, distillates, heat transfer fluids, hot oil and paints. For shafts harder than 500 Brinell.
Textured acrylic fibre impregnated with 40 % colloidal PTFE and synthetic oil. General industry and pulp & paper applications requiring white, non-staining packing.
Textured acrylic fibre impregnated with 30 % colloidal graphite and synthetic oil. Higher heat dissipation than Style 1077. General industry.
Wrapped pre-oxidised PAN and aramid fibres impregnated with 30 % colloidal PTFE and synthetic oil. Slurries, polymerising fluids, glues and abrasive fluids.
91 % expanded graphite wrapped around 9 % synthetic graphite, with non-metallic corrosion inhibitor. High-temperature, high-pressure pumps and valves, high speed, chemicals and saturated steam.
93 % expanded graphite wrapped around 7 % Inconel alloy wire. High-temperature, high-pressure valves, saturated steam and chemical resistance.
85 % expanded graphite wrapped around 15 % Inconel wire, with non-metallic corrosion inhibitor. Steam valves, soot blowers and gates.
Pure non-sintered extruded PTFE yarn with special lubricants; its softness reduces shaft friction and allows high mouldability. Style 1301 adds graphite dispersion. Specific for crystallisers.
Packing with detectable yarn, designed for lines where a loose fibre must never reach the product: food, beverage and pharmaceutical.
Mouldable sealing cord formed in place on the flange: easy to install and remove with no scraping, and it fills severe surface irregularities. Highly compressible and only light bolt torque is required.
Expanded graphite version of the self-forming cord, for flanges, valves, gates and taps requiring higher thermal and chemical resistance. Seals up to 3000 PSI (200 bar).
Self-forming joint sealant cord, easy to install and remove with no scraping. Fills severe flange irregularities, is highly compressible, requires only light bolt torque and seals up to 3000 PSI (200 bar). No material waste and unlimited shelf life.
Expanded graphite tape to form packing rings of any size directly at the plant, removing the need to stock by diameter.
Complete tool set: flexible and rigid extractors, hook-type extractors, special rigid valve packing extractors and ring cutters. Removing the old packing completely is half of a correct installation.
本系列中未找到该关键词。请联系我们，我们会帮您查找。
所列极限值仅供参考，切勿同时按最大值组合使用。请就您的实际工况与我们联系。
告诉我们需要密封的设备——泵、阀门、搅拌器或管线——我们将回复技术选型建议与报价。