A brief soak in water brings it to 80 Shore A in 10–15 minutes. Applied over leaking pipes or corroded surfaces, it resists crude oil, sulphuric acid (>10 %), caustic soda, steam and many other fluids. ASME PCC-2/2008 certified.
Same fast-curing technology for hot service: up to 500 °C continuous and 550 °C maximum.
Self-amalgamating elastomeric tape applied before Seal-Tex to dampen the leak and speed up the repair. For large holes it can be combined with a wooden wedge or a screw.
Replaces conventional flange covers across a wide size range, eliminating the need to stock a protector per diameter. Prevents harmful spray-out and misting from faulty flange joints.
Pre-dosed polymer compound with glass fibre grains and catalyst inside the matrix: cut the amount needed from the stick, knead with your fingers and it cures in minutes. Also repairs metal parts underwater and in damp environments.
Compound able to stop or completely seal a leak with a single touch. For low-pressure leak sealing and surface waterproofing.
Emergency kit ready for the plant: 2× Seal-Tex 50×1800 mm, 2× Seal-Tex 50×3600 mm, 2× Seal-Tex 100×3600 mm, 1× Seal-Tex XT 100×4600 mm, 1× Self-Seal 25 mm×5 m, 1× Self-Seal 50 mm×5 m and 1× Flange-Seal 50×5 mm.
本系列中未找到该关键词。请联系我们，我们会帮您查找。
所列极限值仅供参考，切勿同时按最大值组合使用。请就您的实际工况与我们联系。
告诉我们需要密封的设备——泵、阀门、搅拌器或管线——我们将回复技术选型建议与报价。