Repair a leak in 20 minutes, with one man and without draining the line. Seal-Tex is certified and approved to ASME PCC-2/2008 for the repair of pressure equipment and piping, and is already standard emergency containment kit in refineries, power plants and process plants.
A brief soak in water brings it to 80 Shore A in 10–15 minutes. Applied over leaking pipes or corroded surfaces, it resists crude oil, sulphuric acid (>10 %), caustic soda, steam and many other fluids. ASME PCC-2/2008 certified.
Same fast-curing technology for hot service: up to 500 °C continuous and 550 °C maximum.
Self-amalgamating elastomeric tape applied before Seal-Tex to dampen the leak and speed up the repair. For large holes it can be combined with a wooden wedge or a screw.
Replaces conventional flange covers across a wide size range, eliminating the need to stock a protector per diameter. Prevents harmful spray-out and misting from faulty flange joints.
Pre-dosed polymer compound with glass fibre grains and catalyst inside the matrix: cut the amount needed from the stick, knead with your fingers and it cures in minutes. Also repairs metal parts underwater and in damp environments.
Compound able to stop or completely seal a leak with a single touch. For low-pressure leak sealing and surface waterproofing.
Emergency kit ready for the plant: 2× Seal-Tex 50×1800 mm, 2× Seal-Tex 50×3600 mm, 2× Seal-Tex 100×3600 mm, 1× Seal-Tex XT 100×4600 mm, 1× Self-Seal 25 mm×5 m, 1× Self-Seal 50 mm×5 m and 1× Flange-Seal 50×5 mm.
We could not find that term in this line. Write to us and we will look it up for you.
The limits shown are indicative and must never be combined at their maximum values. Ask us about your actual service condition.
Tell us what you need to seal — pump, valve, agitator or line — and we will come back with a technical recommendation and a quotation.