Two-component metal-ceramic compounds on epichlorohydrin epoxy resin, filled with metals, minerals and ceramics. They rebuild pump casings, impellers, shafts, tanks and piping attacked by corrosion, erosion, chemicals or abrasion — and the repaired part ends up better protected than the original, because the polymer layer insulates and eliminates future corrosion.
Aluminium microgranules treated with a surface agent for perfect dispersion in the resin. Ideal to seal voids and repair damage in dies, castings and aluminium parts.
Fluid consistency penetrating the smallest metal porosities. For prototypes and casting patterns, and to block metal parts on ultrasonic welding equipment.
Ultra-pure titanium fillers and a new-generation binder resin: maximum compressive strength with excellent chemical resistance. To rebuild pump casings, seats, impellers and shafts, and as a full anticorrosive coating. Thixotropic.
Steel microgranules with heat-resistant resin, to repair hot-running installations: pumps, valves, piping and gates. Applicable up to 200 °C continuous and 280 °C for short periods.
Extremely fast-curing metal compound for emergency repairs on pipes, casings, pumps and gearboxes. It must afterwards be protected with another Sealtek compound.
Polyurethane catalyst replacing the standard one in CE-P, CE-L and ST-P, turning high-hardness compounds into elastic materials, up to a rubber-like consistency. Unbeatable on surfaces subject to mechanical shock.
Ethoxyline resins filled with silicates and silicone-stabilised, to coat and repair iron, cement, concrete, pumps, tanks, vats and floors. Adheres even on damp substrates, in the presence of water and at low temperature.
Zirconium oxide super-ceramic paste of very high viscosity: applies on inclined, vertical or overhead surfaces. White in colour with excellent chemical resistance; ideal to line pump casings in paper and pharmaceutical plants, pipes and elbows.
Metal-ceramic to repair, rebuild and protect surfaces under strong erosion, corrosion and abrasion. With the Flex-Y hardener it gains the ability to absorb vibration and shock.
Fluid metal-ceramic to repair and protect surfaces under strong abrasion and erosion. Easy to apply by roller or brush; with Flex-Y it yields an elastic surface outlasting the new material.
Fluid zirconium-oxide super-ceramic of great surface hardness, for heavy abrasion and erosion on pump covers, pipes, elbows, impellers and valves. Brush-applied with fast polymerisation.
Extremely fine steel powder pre-treated with a bonding agent, polymer resin and corrosion inhibitors. To eliminate corrosion and pitting in tanks, pipes, pump casings and equipment parts, stainless included: its high dielectric strength prevents galvanic corrosion.
Extra-fine steel grains with bonding agent, resin and corrosion inhibitors, fluid consistency. For surface damage, patterns and guide moulds, sealing microporosity and blowholes, and as a locking agent for tooling.
Steel macroparticles with the catalyst inside the matrix itself, in stick form: cut the length needed, knead with your fingers and it hardens perfectly in a few minutes. Huge savings in material and time.
We could not find that term in this line. Write to us and we will look it up for you.
The limits shown are indicative and must never be combined at their maximum values. Ask us about your actual service condition.
Tell us what you need to seal — pump, valve, agitator or line — and we will come back with a technical recommendation and a quotation.